The User Data Partitioncannot Be Used Again Please Select Operation as Follows
Cause:
(1) Mainly from the installation of faulty for incompatible hardware (such as BIOS), drivers, and software.
(two) Also potentially from incompatibility between device drivers, system service, antivirus and fill-in tools, and the newly updated Windows system.
Solution:
Use PC Manager to check the calculator hardware, particularly that related to the memory. If there are hardware problems, bring your estimator, proof of buy, and warranty to an authorized Huawei Service Center for assist. If there are no hardware problems, perform the following operations.
(1) If yous have not installed the latest patch version, please download it.
Click the Windows icon then the Settings icon, then go to Update & Security > Windows Update > Checking for updates . Download and install the latest patch version and restart your figurer.
(two) If this consequence occurs later a new driver or software has been installed, uninstall or disable the driver or software. If it occurs after hardware has been installed, remove the hardware.
(3) If you are unable to get-go your computer, endeavor starting it in Condom mode. Then, remove or disable newly installed drivers or programs.
To do this, perform the following operations. Shut down your calculator, press and hold F8 until the HUAWEI logo is displayed on the startup screen. Click Troubleshoot , and go to Advanced options > Come across more recovery options > Startup Settings > Restart . Press F4 and select Enable Safe Mode . Open Command Panel and click Program and Features.
(4) If the issue persists, support important information, connect your figurer to a ability source, and printing and hold F10 during startup to restore your computer to its factory settings. Please annotation that this office is not available on Huawei or Honour computers released in United States (US).
Restoring your organization to the factory settings will articulate all your information in the C drive. Dorsum up any important data before you keep.
Cause:
This consequence is generally caused by hardware failure, for example, the installation of incompatible hardware or a problem with the RAM.
Solution:
Use PC Director to check your computer's hardware. If there are hardware issues, bring your computer, proof of purchase, and warranty to an authorized Huawei Service Center for assist. If there are no hardware issues, perform the following operations.
(ane) If this is merely an occassional issue, restart your estimator to determine if the issue can be resolved.
(two) If the result occurs after hardware has been installed, bring your reckoner, proof of purchase, and warranty to an authorized Huawei Service Center for help. If it occurs after a driver has been installed or updated, uninstall or disable the driver.
(3) If the result occurs after Windows has been installed, it may be because the computer cannot meet the minimum memory and disk space requirements.
Cause:
This happens when Windows kernel has detected an invalid or unknown process.
Solution:
Apply PC Manager to check the estimator hardware, especially that related to the retentiveness. If at that place are hardware issues, bring your reckoner, proof of buy, and warranty to an authorized Huawei Service Center for assistance. If there are no hardware problems, perform the following operations.
(ane) If the name of a driver is displayed on the blue screen, uninstall or disable the driver.
(2) If this issue occurs after a driver or software has been installed, uninstall or disable the commuter or software.
(3) If Win32K.sys is displayed on the blue screen, the issue may be caused by the interference of third-party remote command apps. To resolve this, printing the Win and R keys at the same time to display the Run window, and enter services.msc to find and disable the app.
(4) If you are unable to commencement your computer, try starting information technology in Rubber mode. Then, remove or disable newly installed drivers or programs.
To do this, perform the following operations. Shut downwards your computer, and then press and agree F8 during startup until the HUAWEI logo displayed on the startup screen. Click Troubleshoot , and go to Advanced options > See more than recovery options > Startup Settings > Restart . Printing F4 and select Enable Safe Mode . Open up Control Console and click Program and Features.
(5) If the consequence persists, support important data, connect your computer to a power source, and press and hold F10 during startup to restore your computer to its manufactory settings. Please annotation that this function is not available on Huawei or Honor computers released in Usa (United states of america).
Restoring your arrangement to the manufacturing plant settings will clear all your data in the C drive. Dorsum up any of import data before you lot proceed.
Cause:
If the end code is displayed as "0x00000023", the issue usually occurs in the organization partition for files that have the format of FAT16 or FAT32. If the stop code is displayed every bit "0x00000024", the issue usually occurs in the partition for NFTS.sys. Both types of issues may be caused by disk harm.
They may besides be caused by disk fragmentation, frequent reading or writing tasks in files, an excessive amount of data in operation, or the installation of incompatible software or antivirus programs.
Solution:
Use PC Director to check the reckoner hardware, especially that related to the memory. If there are hardware issues, bring your computer, proof of purchase, and warranty to an authorized Huawei Service Centre for help. If in that location are no hardware problems, perform the post-obit operations.
(1) Disable all scanning software such as antivirus programs, firewall inspect tools, backup tools, and defragmentation tools.
(2) If you are unable to offset your computer, try starting it in Safe way. And so, remove or disable newly installed drivers or programs.
To do this, perform the following operations. Shut down your calculator, press and hold F8 until the HUAWEI logo is displayed on the startup screen. Click Troubleshoot , and go to Advanced options > See more than recovery options > Startup Settings > Restart . Press F4 and select Enable Prophylactic Way . Open Control Panel and click Program and Features.
(three) If the issue persists, support important data, connect your calculator to a power source, and press and concur F10 during startup to restore your computer to its manufactory settings. Please note that this function is not available on Huawei or Laurels computers released in Usa (US).
Restoring your system to the factory settings will clear all your data in the C bulldoze. Back up any of import data before you proceed.
Crusade:
This happens when an mistake occurs during the parity check of the system retention. Computer hardware problems are usually caused past memory mistake, second-level enshroud mistake or display error. They can also occur when disks in the calculator are infected by viruses or are otherwise damaged, or when the device commuter tries to access a memory address that does not exist.
Solution:
Use PC Manager to bank check the computer hardware, especially that related to the memory. If there are hardware issues, bring your computer, proof of buy, and warranty to an authorized Huawei Service Center for assist. If there are no hardware issues, perform the following operations.
(ane) If this issue occurs later new hardware has been installed, bring your computer to an authorized service centre for assist. If this outcome occurs after a commuter has been installed or updated, uninstall or disable the driver.
(two) Utilize the latest version of antivirus software to browse your computer for viruses.
(three) If the issue persists, back up important information, connect your computer to a power source, and press and hold F10 during startup to restore your computer to its manufacturing plant settings. Please notation that this function is not available on Huawei or Laurels computers released in United States (United states).
Restoring your system to the factory settings will articulate all your data in the C drive. Back up any important data earlier you continue.
Cause:
This issue occurs when overwhelming input/output operations or use of faulty drivers cause a RAM problem.
Solution:
(1) Uninstall all newly installed software and drivers, specially apps and antivirus software that tin can enhance disk functioning.
(2) If the effect persists, support important data, connect your estimator to a power source, and press and hold F10 during startup to restore your figurer to its manufactory settings. Please note that this part is not available on Huawei or Accolade computers released in United states of america (U.s.).
Restoring your system to the manufacturing plant settings volition articulate all your data in the C drive. Back up any important information earlier yous proceed.
Cause:
This issue is normally caused by faulty hardware drivers.
Solution:
(i) If the issue occurs subsequently a new driver has been installed, uninstall the driver.
(2) If the outcome persists, dorsum up important data, connect your computer to a power source, and press and hold F10 during startup to restore your calculator to its manufacturing plant settings. Delight note that this function is non available on Huawei or Laurels computers released in United states (United states of america).
Restoring your arrangement to the factory settings will clear all your data in the C drive. Back upwardly any of import data before yous go on.
Crusade:
This issue can exist caused by the installation of faulty hardware, RAM problems (related to retentiveness, second-level cache, or graphics card RAM memory), incompatible software (particularly remote control third-political party apps and antivirus software), NTFS partition damage, and the installation of faulty Windows Installer packages.
Solution:
Use PC Managing director to check the computer hardware, especially that related to the memory. If in that location are hardware bug, bring your computer, proof of purchase, and warranty to an authorized Huawei Service Center for assistance. If in that location are no hardware issues, perform the following operations.
(ane) If this issue occurs subsequently new hardware has been installed, remove the hardware. If it occurs after a Windows Installer parcel has been installed, uninstall the package.
(2) If you are unable to start your computer, try starting it in Safe manner. So, remove or disable newly installed drivers or programs.
To practise this, perform the following operations. Shut downwards your computer, printing and concord F8 until the HUAWEI logo is displayed on the startup screen. Click Troubleshoot , and go to Avant-garde options > See more than recovery options > Startup Settings > Restart . Press F4 and select Enable Safe Mode . Open Control Panel and click Program and Features.
(3) If the event can be resolved by closing the antivirus software, update the software and the Windows system.
(4) If the issue persists, support of import information, connect your reckoner to a power source, and press and concur F10 during startup to restore your computer to its factory settings. Please annotation that this role is not available on Huawei or Honor computers released in United States (U.s.).
Restoring your system to the factory settings will clear all your data in the C drive. Support whatsoever of import data before you proceed.
Cause:
This issue is caused by a Windows Registry Editor error. Disk damage or a file system error has led to an input/output fault during file reading for Windows Registry Editor.
Solution:
(1) Use PC Manager to check the figurer hardware, especially that related to the memory. If there are hardware issues, bring your computer, proof of purchase, and warranty to an authorized Huawei Service Centre for assistance.
(2) If there are no hardware issues, back up important data, connect your computer to a ability source, and press and hold F10 during startup to restore your computer to its factory settings. Please note that this part is not available on Huawei or Honour computers released in United States (US).
Restoring your system to the factory settings will clear all your information in the C drive. Back up any of import data before y'all proceed.
Crusade:
This event occurs when the reckoner system is started in an invalid partition table.
Solution:
(one) Restart your calculator and check if the issue can exist resolved.
(2) If the event persists, restart your computer and enter Safe fashion.
To do this, perform the following operations. Shut down your computer, printing and hold F8 until the HUAWEI logo is displayed on the startup screen. Click Troubleshoot, and go to Advanced options > See more recovery options > Startup Settings > Restart . Press F4 and select Enable Prophylactic Mode . Open Control Console and click Program and Features.
Cause:
This issue is caused by startup failure for an important system service.
Solution:
(1) If the issue occurs afterwards new hardware or drivers accept been installed, remove or uninstall the hardware or drivers.
(ii) Press and concur F8 during startup and enable Safe style.
To do this, perform the following operations. Shut downwards your figurer, press and hold F8 until the HUAWEI logo is displayed on the startup screen. Click Troubleshoot , and become to Avant-garde options > See more recovery options > Startup Settings > Restart. Printing F4 and select Enable Safe Mode . Open Control Panel and click Program and Features.
(3) If the issue persists, back up important data, connect your calculator to a ability source, and press and hold F10 during startup to restore your computer to its factory settings. Please note that this function is not bachelor on Huawei or Honor computers released in United States (United states of america).
Restoring your organization to the factory settings volition clear all your information in the C drive. Back up any of import information earlier y'all proceed.
Crusade:
(1) This issue occurs considering of disk harm, use of improper cables, use of unlike ATA devices on the same cable, or incompatibility between drivers and updated hardware.
(two) It can besides exist acquired past lost hard disk sectionalisation or closing of drivers due to incorrect operations.
Solution:
Utilize PC Manager to bank check the estimator hardware, especially that related to the memory. If there are hardware problems, bring your computer, proof of purchase, and warranty to an authorized Huawei Service Center for help. If there are no hardware issues, perform the following operations.
(1) If this consequence occurs afterward new hardware has been installed, remove the hardware.
(2) If the system patch on your computer is not the latest version, download the latest patch version.
Click the Windows icon and then the Settings icon, and go to Update & Security > Windows Update > Checking for updates . Download and install the latest patch version and restart your computer.
(3) If the issue persists, support important information, connect your reckoner to a power source, and press and agree F10 during startup to restore your computer to its factory settings. Delight note that this function is not available on Huawei or Honor computers released in United states of america (US).
Restoring your system to the factory settings will articulate all your information in the C drive. Back up any important information before you continue.
Crusade:
This issue often occurs during startup, and is unremarkably caused past faulty drivers or damaged system files.
Solution:
(1) If information technology is the outset fourth dimension that you have encountered this outcome, restart your figurer and check if the issue can exist resolved.
(2) If this consequence occurs after hardware has been installed, bring your estimator to an authorized Huawei Service Center to remove the hardware. If the issue occurs after a driver has been installed or updated, uninstall or disable the driver.
(three) If yous are unable to showtime your reckoner, endeavour starting it in Safe mode. Then, remove or disable newly installed drivers or programs.
To do this, perform the following operations. Shut down your computer, and press and hold F8 until the HUAWEI logo is displayed on the startup screen. Click Troubleshoot , and go to Advanced options > Encounter more recovery options > Startup Settings > Restart . Press F4 and select Enable Safe Mode . Open Control Panel and click Program and Features.
(4) If the outcome persists, back up important information, connect your computer to a power source, and printing and concord F10 during startup to restore your computer to its factory settings. Please note that this part is non available on Huawei or Honor computers released in United States (U.s.).
Restoring your system to the factory settings will clear all your information in the C drive. Support any important data before you keep.
Cause:
This upshot occurs when Windows Registry does non comprise all 4 central registry root keys: SAM, SECURITY, SOFTWARE, and DEFAULT.
Solution:
(1) If "0xc000017d:STATUS_NO_LOG_SPACE" is displayed, the result is caused past insufficient disk space. To resolve the result, free up your disk space.
(2) If "0xC000009A:STATUS_INSUFFICIENT_RESOURCES" is displayed, the issue is caused past insufficient resources for completing API, meaning that the Windows organization does not have sufficient memory.
Cause:
This issue is caused past a Windows Registry error. It usually occurs when arrangement modules have been damaged, or certain registry root keys are missing. The issue may too occur when y'all edit the registry.
Solution:
(one) Printing and hold F8 during startup.
To do this, perform the following operations. Shut downwardly your computer, press and concur F8 until you see the HUAWEI logo to display the startup screen. Click Troubleshoot , and get to Advanced options > Encounter more recovery options > Startup Settings > Restart . Press F4 and select Enable Rubber Mode . Open Control Console and click Program and Features.
(2) If the issue persists, back up of import data, connect your computer to a ability source, press and agree F10 during startup of your computer to restore information technology to its manufactory settings. Delight annotation that this role is non bachelor on Huawei or Honor computers released in United States (United states of america).
Restoring your arrangement to the factory settings will articulate all your data in the C drive. Dorsum upward any important data before you proceed.
Cause:
This issue occurs when sure drivers have not properly freed up memory after an input/output functioning.
Solution:
(1) If this issue occurs subsequently a new driver or software has been installed, uninstall or disable the driver or software.
(2) If the issue persists, dorsum up important data, connect your figurer to a power source, and press and agree F10 during startup to restore your computer to its factory settings. Please note that this function is not available on Huawei or Honour computers released in United States (US).
Restoring your system to the factory settings volition articulate all your information in the C drive. Back upward any of import data before you proceed.
Crusade:
This issue occurs when data cannot be found in either the computer's virtual retentiveness or concrete memory. It is usually caused by a RAM problem, disk damage, or virus infection.
Solution:
Use PC Manager to check the computer hardware, peculiarly that related to the memory and motherboard. If in that location are hardware issues, bring your computer, proof of buy, and warranty to an authorized Huawei Service Center for assistance. If there are no hardware issues, perform the following operations.
(ane) Use the latest version of antivirus software to browse your computer for viruses.
(ii) If the system patch on your computer is not from the latest version, download and install the latest patch version.
Click the Windows icon so the Settings icon, and and so go to Update & Security > Windows Update > Checking for updates . Download and install the patch from the latest version and restart your computer.
(iii) If the issue persists, back upwardly important data, connect your calculator to a power source, and press and agree F10 during startup to restore your computer to its factory settings. Please note that this office is not available on Huawei or Accolade computers released in United states (US).
Restoring your system to the factory settings will articulate all your data in the C drive. Back up any important data before yous keep.
Cause:
This upshot occurs when data in the virtual memory cannot be read and stored in the system memory. It is caused by file damage or a virus infection in the virtual memory.
Solution:
Use PC Manager to check the computer hardware, especially that related to the memory and motherboard. If there are hardware bug, bring your calculator, proof of purchase, and warranty to an authorized Huawei Service Eye for assistance. If there are no hardware issues, perform the post-obit operations.
(1) Use the latest version of antivirus software to browse your estimator for viruses.
(two) If the arrangement patch on your computer is not from the latest version, download and install the latest patch version.
Click the Windows icon and so the Settings icon, and get to Update & Security > Windows Update > Checking for updates . Download and install the latest patch version and restart your figurer.
(3) If the result persists, support important data, connect your reckoner to a power source, and press and hold F10 during startup to restore your computer to its manufactory settings. Delight note that this function is not bachelor on Huawei or Honor computers released in United States (U.s.a.).
Restoring your system to the mill settings volition articulate all your data in the C drive. Back up any important data before you go on.
Crusade:
This upshot occurs when your estimator's system partitioning cannot be accessed during startup. It is usually acquired by hd startup failure. If the consequence occurs during the arrangement installation, it may exist caused by incompatibility between disks and the Windows system, or from a virus infection or disk damage.
Solution:
(1) If this issue is caused by a startup disk error, edit the BOOT file.
(2) If it occurs after new hardware has been installed, remove the hardware. If it occurs afterward a new driver has been installed, uninstall or disable the commuter. If you are notwithstanding unable to access the system, restart your computer, press and hold F8 to display the startup screen and restore your organisation to the previous version.
To exercise this, perform the post-obit operations. Shut downwards your computer, press and hold F8 until the HUAWEI logo is displayed on the startup screen. Click Troubleshoot , and go to Avant-garde options > Uninstall Updates > Choose an account to continue > Enter the password for this account > Keep > Uninstall Update . If you do not accept a password, click continue after y'all take selected your business relationship. Your arrangement will return to the previous version.
(3) Use the latest version of antivirus software to browse your figurer for viruses.
(4) If the issue persists, support important data, connect your computer to a power source, and printing and hold F10 during startup to restore your reckoner to its factory settings. Please note that this role is not available on Huawei or Honor computers released in United States (US).
Restoring your system to the factory settings will clear all your data in the C drive. Support any important data before yous keep.
Crusade:
This issue is caused by hardware incompatibility, faulty drivers, system service error or software incompatibility.
Solution:
Use PC Manager to check the calculator hardware, especially that related to the memory. If there are hardware issues, bring your computer, proof of buy, and warranty to an authorized Huawei Service Eye for assistance. If in that location are no hardware problems, perform the following operations.
(1) If this issue occurs later on new hardware has been installed, remove the hardware. If it occurs after a new driver or software has been installed, uninstall or disable the driver or software.
(2) If the proper name of a driver is displayed on the bluish screen, disable or remove the commuter in Condom mode.
To do this, perform the following operations. Close downwards your computer, press and concord F8 until the HUAWEI logo is displayed on the startup screen. Click Troubleshoot , and get to Advanced options > See more than recovery options > Startup Settings > Restart . Press F4 and select Enable Rubber Style . Open Control Panel and click Program and Features.
(3) If Win32K.sys is displayed in the blue screen, the upshot may be caused by the interference of third-political party remote control apps. To resolve this, disable the corresponding apps.
(iv) If the issue persists, dorsum upward important data, connect your computer to a ability source, and printing and hold F10 during startup to restore your computer to its factory settings. Please note that this function is non available on Huawei or Accolade computers released in United states of america (US).
Restoring your system to the factory settings will clear all your data in the C drive. Support any important data earlier you proceed.
Cause:
This effect usually occurs considering of faulty or incompatible hardware and software. It may also be caused past overclocking.
Solution:
Use PC Managing director to cheque the computer hardware, particularly that related to the retentivity. If there are hardware bug, bring your estimator, proof of purchase, and warranty to an authorized Huawei Service Centre for assist. If in that location are no hardware problems, perform the following operations.
(one) If this issue occurs after new hardware has been installed, remove the hardware. If information technology occurs after a new driver has been installed, uninstall or disable the driver.
(ii) If yous are unable to commencement your estimator, try starting information technology in Safe mode. And so, remove or disable newly installed drivers or programs.
To do this, perform the following operations. Shut down your estimator, press and hold F8 until the HUAWEI logo is displayed on the startup screen. Click Troubleshoot , and go to Avant-garde options > See more recovery options > Startup Settings > Restart . Press F4 and select Enable Rubber Mode . Open Control Panel and click Program and Features.
(3) If the event occurs afterwards you have updated the Windows system, uninstall or close third-party device drivers, disable organisation services, and cease virus scanning.
Cause:
This event is usually caused by faulty hardware.
Solutions:
(1) If this issue occurs after new hardware or a new commuter has been installed, remove or uninstall the hardware or commuter.
(2) If information technology occurs after a driver has been updated, restore the driver to its previous version.
(three) Use PC Manager to check the computer hardware, specially that related to the memory. If there are hardware issues, bring your computer, proof of purchase, and warranty to an authorized Huawei Service Eye for assistance.
Cause:
This issue is acquired past faulty Windows kernel programming.
Solution:
Apply PC Manager to check the calculator hardware, especially that related to the retention. If there are hardware problems, bring your computer, proof of purchase, and warranty to an authorized Huawei Service Middle for assistance. If at that place are no hardware problems, perform the following operations.
(one) If this issue occurs after a new commuter or software has been installed, uninstall or disable the driver or software.
(2) If the name of a commuter is displayed on the blue screen, disable or remove the commuter in Safe fashion.
To exercise this, perform the following operations. Shut down your computer, press and hold F8 until the HUAWEI logo is displayed on the startup screen. Click Troubleshoot , and become to Advanced options > Meet more than recovery options > Startup Settings > Restart . Press F4 and select Enable Condom Mode . Open Control Panel and click Programme and Features.
(3) If Win32K.sys is displayed on the blue screen, the outcome may exist caused by the interference of tertiary-political party remote control apps. To resolve this, disable the respective apps.
(four) If the consequence persists, support important data, connect your computer to a power source, press and agree F10 during startup to restore your computer to its mill settings. Delight note that this role is not bachelor on Huawei or Accolade computers released in United States (US).
Restoring your system to the factory settings will clear all your data in the C drive. Back up whatever of import data before you proceed.
Crusade:
This issue is ordinarily caused by faulty hardware. It normally occurs because of overclocking or hardware issues related to the RAM, CPU, cable, and charger.
Solution:
Use PC Manager to bank check the estimator hardware, especially that related to the retentiveness. If in that location are hardware issues, bring your computer, proof of purchase, and warranty to an authorized Huawei Service Heart for assistance.
Cause:
This event is usually related to ability-related causes, often occuring when the computer is close downwards, in Hibernation, or in standby mode.
Solution:
Apply PC Manager to check the reckoner hardware, peculiarly that related to the memory. If there are hardware problems, bring your reckoner, proof of purchase, and warranty to an authorized Huawei Service Center for assistance. If there are no hardware issues, perform the post-obit operations.
(1) Disable all newly installed drivers.
(2) If you are unable to first your estimator, try starting it in Safe way. Then, remove or disable newly installed drivers or programs.
To do this, perform the following operations. Shut down your computer, printing and hold F8 until the HUAWEI logo is displayed on the startup screen. Click Troubleshoot , and go to Advanced options > Run across more recovery options > Startup Settings > Restart . Press F4 and select Enable Safe Mode . Open Control Panel and click Program and Features.
(three) Update all software that uses filter drivers, such as antivirus software or backup apps.
Cause:
This issue occurs when the figurer'south graphics carte du jour of the computer is non working properly. It is caused past the installation of hardware that is incompatible with the graphics bill of fare, or faulty miniport drivers.
Solution:
(1) Enable Safe mode and update the graphics card drivers to the latest version.
To practise this, perform the post-obit operations. Close down your computer, press and hold F8 until the HUAWEI logo is displayed on the startup screen. Click Troubleshoot , and go to Advanced options > See more recovery options > Startup Settings > Restart . Press F4 and select Enable Safe Style . Open Control Console and click Program and Features.
(2) If the issue persists, back upward important data, connect your calculator to a ability source, and printing and concur F10 during startup to restore your reckoner to its factory settings. Please note that this function is non available on Huawei or Honor computers released in The states (US).
Restoring your organization to the manufactory settings will articulate all your data in the C bulldoze. Support any important information before y'all continue.
This event occurs when a sure commuter tries to write on a read-merely segment of your calculator'southward memory. It may be caused by faulty or decadent device drivers that are newly installed, decadent system services, or incompatible firmware software.
Solution:
(one) If the name of a driver orservice file is displayed on the blue screen, uninstall or disable the commuter or software.
(two) If this issue occurs after a new commuter or software has been installed, uninstall or disable the software.
(3) If you are unable to start your figurer, effort starting it in Safe way. Then, remove or disable newly installed drivers or programs.
To practise this, perform the following operations. Shut down your computer, press and concord F8 until the HUAWEI logo is displayed on the startup screen. Click Troubleshoot , and become to Avant-garde options > See more recovery options > Startup Settings > Restart . Press F4 and select Enable Safe Mode . Open up Control Panel and click Plan and Features.
Cause:
This issue occurs when a thread or a commuter tries to operate in the estimator's memory. It is usually caused by faulty drivers or software.
Solution:
(one) If the patch on your computer is not from the latest version, download the latest patch version.
Click the Windows icon and then the Settings icon, and go to Update & Security > Windows Update > Checking for updates . Download and install the latest patch version and restart your computer.
(2) If this result occurs after a new driver or software has been installed, uninstall or disable the commuter or software.
(3) If the effect persists, back upwards important data, connect your computer to a power source, and printing and hold F10 during startup to restore your estimator to its factory settings. Please note that this function is non available on Huawei or Honour computers released in United states of america (US).
Restoring your organization to the factory settings will clear all your data in the C bulldoze. Back up whatever important information before you proceed.
Cause:
This upshot usually occurs due to faulty drivers or system service.
Solution:
Visit the Microsoft official website: https://www.microsoft.com/en-the states/download/details.aspx?id=6812. Download and install DirectX and apply PC Managing director to update the drivers.
Crusade:
This issue occurs when an Interrupt Request Level (IRQL) is too high when browsing paged retention. It may also be caused by the commuter processing the wrong accost. A high IRQL cannot be used when browsing paged retentiveness.
Solution:
Use PC Manager to bank check the computer hardware, specially that related to the memory. If there are hardware issues, bring your computer, proof of purchase, and warranty to an authorized Huawei Service Middle for assistance. If there are no hardware issues, perform the following operations.
(1) If this consequence occurs after a new driver or software has been installed, uninstall or disable the driver or software.
(2) Disable all newly installed drivers. If file names such as acpi.sys are displayed on the blue screen, the result may be caused by faulty drivers.
(3) If the patch on your computer is non from the latest version, download the latest patch version.
Click the Windows icon and so the Settings icon, and become to Update & Security > Windows Update > Checking for updates . Download and install the latest patch version and restart your computer.
(four) If yous are unable to kickoff your reckoner, try starting it in Safe style. Then, remove or disable newly installed drivers or programs.
To do this, perform the following operations. Shut down your computer, press and hold F8 until the HUAWEI logo is displayed on the startup screen. Click Troubleshoot , and go to Advanced options > See more than recovery options > Startup Settings > Restart . Press F4 and select Enable Safe Style . Open Command Panel and click Program and Features.
Cause:
This issue occurs when the display driver is spinning in an infinite loop. Information technology usually indicates that the video hardware or display driver is faulty.
Solution:
(1) Disable all newly installed drivers.
(two) If you lot are unable to get-go your reckoner, effort starting it in Safe mode. Then, remove or disable newly installed drivers or programs.
To exercise this, perform the following operations. Shut down your figurer, press and agree F8 until the HUAWEI logo is displayed on the startup screen. Click Troubleshoot , and become to Avant-garde options > See more than recovery options > Startup Settings > Restart . Press F4 and select Enable Safe Mode . Open Control Panel and click Plan and Features.
Crusade:
This occurs when the user has deliberately initiated a crash dump from either the kernel debugger or the keyboard, and the Memory.dmp file exists.
Solution:
This does not indicate an issue with your computer. If the computer is connected to a keyboard, disconnect the keyboard. Also avoid using the kernel debugger.
Crusade:
This effect may occur when the kicking volume has been corrupted or your system has corrupted files. It may also be acquired by a faulty HDD on your computer, or use of an incorrect cable to connect an HDD with your figurer.
Solution:
Employ PC Manager to bank check the computer hardware, especially that related to the memory. If there are hardware issues, bring your computer, proof of buy, and warranty to an authorized Huawei Service Centre for assist. If there are no hardware bug, perform the post-obit operations.
(1) If the patch on your computer is not from the latest version, download the latest patch version.
Click the Windows icon and then the Settings icon, and become to Update & Security > Windows Update > Checking for updates . Download and install the patch from the latest version and restart your computer.
(2) If you are unable to offset your computer, try starting it in Safe style. Then, remove or disable newly installed drivers or programs.
To do this, perform the following operations. Shut down your figurer, press and concord F8 until the HUAWEI logo is displayed on the startup screen. Click Troubleshoot , and go to Advanced options > See more recovery options > Startup Settings > Restart . Press F4 and select Enable Safe Style . Open up Control Panel and click Program and Features.
Crusade:
This consequence occurs when the kernel detects an interrupt storm. For example, a slice of hardware does not release the interrupt signal. Information technology is often caused past a faulty driver.
Solution:
Employ PC Managing director to uninstall or update newly installed hardware drivers.
Cause:
This consequence occurs when certain files accept been lost or corrupted, or Windows Registry is faulty.
Solution:
(1) If the corresponding file proper name is displayed in the blueish screen, the issue is caused by file loss or damage. Download the file again from the Internet or copy it from another figurer, and place the file in the SYSTEM32 folder.
(2) If no file name is displayed, the issue may be acquired by abuse to Windows Registry. Reset your organisation or employ the backed-upward Windows Registry data to recover the Registry.
(three) If the event persists, back up important data, connect your figurer to a ability source, and press and agree F10 during startup to restore your computer to its manufacturing plant settings. Please annotation that this part is non available on Huawei or Honor computers released in Usa (US).
Restoring your organisation to the factory settings will articulate all your data in the C drive. Back up any important data earlier you keep.
Crusade:
This issue occurs when a necessary registry file cannot exist loaded. It is caused by a corrupt or missing file. The registry files may accept been corrupted because of hard deejay corruption or other hardware trouble.
Solution:
Use PC Manager to check the computer hardware, especially that related to the retention. If there are hardware issues, bring your computer, proof of purchase, and warranty to an authorized Huawei Service Middle for assistance. If there are no hardware issues, perform the post-obit operations.
(one) If you lot can enter Safe mode, recover the corrupt file.
(2) If the issue persists, back up important information, connect your computer to a power source, and press and hold F10 during startup to restore your computer to its factory settings. Delight annotation that this function is non available on Huawei or Honour computers released in United States (US).
Restoring your organisation to the factory settings volition clear all your data in the C drive. Back up whatever of import data earlier you keep.
Cause:
This is commonly caused past damaged or decadent organization files, drivers, or faulty hardware.
Solution:
(1) If you can enter Safe mode, press the Windows and R keys to display the Run window and enter sfc /scannow to resolve the event.
To do this, perform the following operations. Shut down your figurer, printing and concur F8 until the HUAWEI logo is displayed on the startup screen. Click Troubleshoot , and go to Advanced options > Encounter more recovery options > Startup Settings > Restart . Printing F4 and select Enable Safe Mode . Press the Win and R keys at the same time to brandish the Run window and enter sfc /scannow and press Enter.
(2) If y'all tin enter Safe way, use the commands "copy" or "expand" to obtain the corrupt file.
(three) If the upshot persists, dorsum up of import data, connect your calculator to a power source, press and hold F10 during startup to restore your figurer to its factory settings. Please note that this function is non available on Huawei or Honor computers released in Us (US).
Restoring your organisation to the factory settings will articulate all your information in the C drive. Back up whatsoever of import data before you keep.
Cause:
This occurs when a user-manner subsystem, such as WinLogon or the Client Server Run-Fourth dimension Subsystem (CSRSS), has been fatally compromised and security tin can no longer be guaranteed. Microsoft Windows cannot run without WinLogon or CSRSS.
Solution:
(1) If this upshot occurs in a user-mode device driver, system service, or a 3rd-party app, uninstall or disable the corresponding program. If information technology occurs after new hardware has been installed, remove the hardware.
(2) Disable all newly installed drivers.
(3) If you are unable to beginning your figurer, attempt starting it in Safety mode. Then, remove or disable newly installed drivers or programs.
To do this, perform the post-obit operations. Shut down your reckoner, press and hold F8 until the HUAWEI logo is displayed on the startup screen. Click Troubleshoot , and go to Advanced options > Run across more than recovery options > Startup Settings > Restart . Press F4 and select Enable Safe Mode . Open Command Panel and click Program and Features.
(four) If the consequence persists, support of import data, connect your computer to a power source, press and agree F10 during startup to restore your figurer to its factory settings. Please note that this role is non available on Huawei or Honor computers released in United States (US).
Restoring your system to the manufactory settings will clear all your data in the C drive. Dorsum upward any important data before yous keep.
Source: https://consumer.huawei.com/en/support/content/en-us00696456/
0 Response to "The User Data Partitioncannot Be Used Again Please Select Operation as Follows"
Post a Comment